JLSUN®WAI-C anti--tick finishing agent, its anti-tick performance meets the requirements of the anti-moth standards for wool products in various countries, and can reach the level specified by the International Wool Bureau's anti-moth grade standard. It has no peculiar smell, after washing and sun exposure. It can still maintain good anti-moth performance.
   Performance
 The main component of WAI-C is: 3-phenoxybenzyl-2,2-dimethyl-3-(2,2-dichlorovinyl)-1-cyclopropane carboxylate, CAS Registration number 52645-53-1; WAI appearance is light brown-yellow transparent liquid (white agglomerates may be produced below 5℃, but it will not affect the use, and it can be restored to the original state after a little warming); non-ionic; density 0.90g/cm3 ; The pH value is 6.5, can be mixed with water in any ratio, and can be used in the same bath with softeners, flame retardants, antibacterial agents and other finishing agents. Insect prevention agent WAI-C does not contain harmful substances such as formaldehyde, heavy metal ions and azo compounds. The structural formula of its main components is as follows:
  WAI-C is easy to use, does not affect normal dyeing, and does not reduce the color fastness, shade, strength and comfort of wool. The fabric treated by WAI-C has anti-moth properties and fastness to shrinkage and soaping. It repels all the moths listed in the IWS E10 Insect Repellent Specification Sheet. After the fastness test of IWS TM28 Moth Insect Repellent, it can still maintain its anti-moth performance. .
 The main components of WAI-C are in line with the International Wool Bureau IWS TM27 "Chemical Analysis Method for the Content of Insect Insect Agents in Textiles", IWS TM28 "Insect Insect Repellent (IR) Fastness Test", IWS E10 "Insect Insect Specification Table" 、Technical requirements for environmental labeling products of the People's Republic of China HJBZ 011-96 "Insect-proof woolen textiles", People's Republic of China textile industry standard FZ/T20003-91 "Chemical analysis methods for the content of insect-proof agents in wool textiles" and the textile industry standard of the People's Republic of China FZ20013-1996 "Insect-proof wool textile products" regulations.
 
  Instructions
  The method of application of WAI-C is dipping, padding, spraying, etc. The usual dosage of WAI-C is 0.3-0.8% (o.w.f.). The specific concentration is adjusted according to the raw material of the treated fabric, the treatment method and the purpose of the product.
 1. Insect-proof finishing process
 WAI-C dosage 0.6-0.8% (o.w.f);
 Bath ratio 1:5～10;
 pH value: 3-6;
 Processing temperature: 40-60℃;
 Time: 30-60min
 
Operation method: After the wool product is washed and rinsed with clean water, add clean water to adjust the pH value, then add the anti-moth agent WAI-C, heat up to 50-60℃, treat for 30-60min, then dehydrate and dry.
  
Dyeing and moth-proofing in the same bath treatment process
 
Dyeing and moth-proofing the same bath treatment process is suitable for piece dyeing, skein dyeing, cheese dyeing, loose wool dyeing, wool top dyeing, finished shirt dyeing, etc. Under normal circumstances, there is no need to change the original dyeing process conditions.
 1. The dosage of WAI-C: 0.6-0.8% (o.w.f);
 2. Bath ratio: 1:10-1:20;
 3. The pH value of the dyeing solution: 3-6;
 4. Operation method:
 Dilute WAI-C with about 10 times warm water, stir it evenly (use it with the preparation), add it to the dyeing vat containing the fabric, circulate for 5 minutes, add dyes, etc., and heat to boiling, 98-100℃, heat preservation 40- 60min, then wash, dehydrate, and dry, as shown in the figure

One-step treatment process for mothproofing and hair oil

The one-step process of mothproofing and hair oil treatment is mainly suitable for products that are not dyed or bleached, such as mothproofing during storage and transportation of raw white wool yarn.
 Dosage: WAI-C 0.3-0.5% (o.w.f)
 Usage: Dilute WAI-C with an appropriate amount of water, mix it evenly, mix it with wool oil, spray it on the fiber when blending wool or sliver, leave it for more than 8 hours after spraying, so that WAI-C can penetrate Evenly.
 
 Packaging and storage: 20kg plastic drum. The storage period is one year. Should be stored in a ventilated and cool room, pay attention to fire prevention.